Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

For all those that were interested in repairing the parking sensor controller once it's been submerged, you might want to think again:

 

post-8971-056921100 1304085060_thumb.jpg

 

post-8971-020245600 1304085053_thumb.jpg

 

Many thanks to Malo225 for sending me his defective unit for inspection, as you can see on the face of it it looks fairly terminal - some serious corrosion has taken place to a number of the SMD components and even the PCB tracks have lifted in a few places where the board itself is rusting... my first impressions are that it's unrepairable but I'll be doing some measuring later to find out just how bad the electrical damage is and I'll report back to you all then!

Posted
That's just how my MK1 looked when the floor flooded. All I did was scrub it clean with a nail brush under running water - then put it in the oven on a very low setting until it had dried out. When I re installed it all worked fine and in fact still is some 5 years later. Hope you are just as lucky!!
Posted

lol, well not quite as it now works, well partly. :16:

 

BJ this was well beyond a wash off, the track had lifted in a number of places so washing it would have made it worse if anything.

 

Gave it an acid bath to start with to strip back some of the crud, then reflowed the solder around the controller where a number of the pins had corroded together. Had to remake a total of 17 joints elsewhere on the PCB and patch in 3 new wires where the track was broken but it fires up, responds to VagCom and seems to work fine with just the rear sensors connected however it still errors with the fronts connected so there are still issues with the board that I'll have to look over later - since its all SMD compentry my eyes have had enough now lol

 

So to sum up, its not the end of the world if the controllers been submerged but the quicker you get to it the higher the chance of recovery.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...